Lemco
HDMOD-3 manual v1.0
6
3.4 FRONT PANEL
Figure No.1
1.
Channel / Profile selection button
2.
Seven Segment Display (SSD)
3.
Up / Down buttons
4.
LED indicators
a.
Lock: ON when HDMI communication have been established
b.
Channel: ON when “Channel” mode is selected
c.
Attenuation: ON when “Attenuator” mode is selected
d.
Channel: ON when “Profile” mode is selected
5.
Ground connector
6.
+12VDC / 1A power input
7.
HDMI input
8.
USB input
9.
RF-OUT output
10.
HDMI output
3.3 INSTALLATION
The HDMOD-3 can be programmed with one of the following ways:
From the front panel display
From the USB interface
