Lemco
HDMOD-3 manual v1.0
15
Software guidelines
1.
From the “ComPort” combo box choose the correct USB port that connects
the HDMOD-3 and press “Connect”.
2.
Once the software has successfully connected with the device, it will
automatically download all the settings of the HDMOD-3.
3.
The DVProbe consists of four sub-categories as described below:
DVB-T Settings – Parameters regarding the modulator part
Encoder Settings – Parameters regarding the H.264 encoder
Multiplexer Settings – Parameters regarding the multiplex part
System Settings – Parameters regarding system information
1. DVB-T Settings
In this category the user is able to adjust several parameters of the modulator RF
output part, as described below:
1.1
Channel
- Output
channel selection (VHF:5-12 & UHF:21-69)
1.2
Bandwidth
- Bandwidth selection
1.3
Constellation
- Constellation selection
1.4
Modulation
- Modulation selection
1.5
Guard Interval
- Guard Interval selection
1.6
Code rate
- Code rate selection
2.Encoder Settings
In this category the user is able to adjust parameters of the H.264 encoder, as
described below:
2.1
Input source
– Select the primary input source
2.2
Video BR (Mpbs)
– Set the video bitrate
2.3
Audio BR (Kbps)
– Set the audio bitrate
2.4
Audio Encoding –
Select the audio encoding
2.5
HDCP ON/OFF
– Enables/disables HDCP
3.Multiplexer Settings
In this category the user is able to adjust parameters of the HDMOD-3 multiplexer, as
described below:
3.1
Network Name
+ ID – Enter the Network name + ID*
3.2
Program Name
+ ID – Enter the Program name + ID
3.3
Provider Name
- Enter the Provider name
3.4
Original Net ID -
Set the Net ID (0-65535)*
3.5
TS ID
- Set the Transport Stream ID (0-65535)*
3.6
PMT PID
– Set the PID value
3.7
Video PID
– Set the Video PID value
3.8
Audio PID
– Set the Audio PID value
3.9
LCN No –
Set the LCN No (1-999) (must be enabled first)
3.10
LCN Provider -
Set the LCN provider
