background image

Lemco  

 HDMOD-2  manual v1.0 

 

1. 

IMPORTANT SAFETY PRECAUTIONS INFORMATION

 

 

 

READ THE FOLLOWING WARNINGS BEFORE YOU USE 

YOUR DEVICE 

 
 
 

WARNING 

 
The  following  safety  precautions  must  be  observed  to  prevent  fire  or  electric 
shock hazard. Safety precautions include but are not restricted to the following: 

 

Power supply / Mains cord 

 

Operate the unit only  within  the voltage  range defined as  appropriate by the 
manufacturer.  

 

Occasionally  check  the  power  connector  and  remove  dirt  or  dust  that  may 
have accumulated. 

 

Use only the mains cord that comes with your unit. 

 

Do  not  operate  the  unit  or  plug  in  the  mains  cord  if  it  is  broken,  split,  or 
damaged in any way. 

 

Do  not  place  the  mains  cord  next  to  heating  devices.  Do  not  pull  it,  place 
heavy objects on it or damage it in any way. Keep it out of reach of children. 

 

Ensure that the device is plugged in a properly grounded socket. Insufficient 
grounding may cause electrocution. 

 

Always  carefully  disconnect  all  plugs  by  pulling  on  the  plug  and  not  on  the 
cord.  Make  sure  the  unit's  power  switch  is  turned  off  before  removing  the 
cord from an outlet. 

 

Disconnect the mains cord when the unit is not in use for long periods of time 
or during storms. 

 

Do not connect the unit to a multiple-outlet to avoid plug overheating. 

 

Disassembling 

 

This  unit  contains  parts  that  cannot  be  repaired  by  the  user.  Do  not 
disassemble  or  try  to  repair  it  as  this  will  void  all  warranties.  Please  contact 
the manufacturer if you experience any problems with your unit. 

 

Water/humidity 

 

Do not keep the unit in a humid place or near water. 

 

Do not plug/unplug the unit with wet hands. 

 

Fire 

 

Never  place  a  candle  or  another  source  of  fire  on  the  unit  as  it  may  fall  and 

start a fire. 

 

If the mains cord or the power connector is damaged or destroyed, or if there 

is a sudden loss of picture during operation, or if you notice a strange smell or 
there is smoke, immediately switch the unit off, disconnect the mains cord and 
contact the manufacturer’s technical support department. 

 

Summary of Contents for HDMOD-2






















Reviews: