TPG10 User Manual
Version GS 1607
26
Version GS 1607
Fig.65
If the measured resistance reading is within limits, then it will display as follows (Fig.66)
Fig.66
8.
If the measured resistance reading has gone beyond the limits, then it will display the screen
as follows (Fig. 67).
Fig.67
Note:
The above indicates that the ground contact from the engine body to the battery is bad.
Check for rusted or corroded point of contacts. If found, dismantle it for cleaning or
replace before fixing back. Repeat the test again after fixing.
9.
If the user did not follow the right procedures during the testing, it will display the results as
follows (Fig.68) below:
Fig.68
10. To printout the results, just press key on the Analyser, the printer will start printing.
11. To exit the program, pressing the
key at any moment will exit and return back to the
main menu screen (Fig.57).
View Test Results from memory:
20.58 m
80.58 m