LEMAN TAB085, Owner'S Manual

Page: 54 / 60

14
VARIABLE SPEED WOOD LATHE
Operation
Power Switch

The lathe is fitted with a no-volt switch.
In the event of a power supply failure
the wood lathe need to be manually re-
started by pushing the “I” button on the
switch.

Lock switch (Alternative)
1. To turn the lathe „on‟, insert the
yellow switch key into the switch
housing.
2. Move the switch to the „on‟ position.
3. To turn the lathe „off‟, move the switch to the „off‟ position.
4. To lock the switch in the „off‟ position, remove the yellow switch key and
store it in a safe place.

NEVER leave a running lathe unattended.
Speed Control

The lathe motor must be turned on
before you can use the speed control
lever.

The speed control lever may be rotated
to any one of ten fixed speeds. To set
the speed, pull back on the speed
control lever (1) and rotate the lever to
the desired speed. Use the index plate
(2) as a reference to select the desired
speed.

Rotating the lever clockwise will
increase the speed while a counter
clockwise rotation decreases the speed.

You must move the speed control
lever to the lowest speed position
before turning the lathe off. Not
complying may prevent the motor
from starting.
EN