LEMAN TAB085, Owner'S Manual

Page: 50 / 60

10
VARIABLE SPEED WOOD LATHE
Assembly, Continued
Headlock Handle

Locate and assemble the head locking
handle (1), spring (2) and Allen bolt (3)
as shown.

Thread the head lock assembly into the
head locking clamp and tighten.
Note: Spring loaded handles
The spring-loaded handles on the lathe
are designed to minimize interference with
other lathe parts or the workpiece. To operate
these handles, push the handle in and rotate
clockwise to tighten. Releasing the handle will
disengage the threaded shaft allowing you to reposition the handle so that it is
out of the way.
Spurs

Remove the faceplate (if factory
installed) (1) from the headstock using
the 2 wrenches (2) provided and set
aside.

Insert the headstock spur (3) into the
spindle hole.

Install the tailstock live center into the
tailstock hole.
Removal of spurs

To remove either the headstock spur or
the tailstock live center insert the push
rod (5) through the back access holes of
the headstock and tailstock.

Remove the rod and store it for future
use.
EN