background image

MAIN TECHNICAL PARAMETERS

Fault

Items to Check

Do not Operate Completely

* If a power failure.
* If the plug inserted correctly into the power socket.
* If the fuse burnt out.
* If the power switch pressed.
* If START / PAUSE button pressed.
* If the set water level reached.

No Water Inlet

* If a water supply cut-off or an under water pressure.
* If the water inlet hose connected properly , and the
   tap turned on.
* lfthe filter net of the intake valve blocked by foreign
   matters.

Abnormal Drainage

* If the water drain hose is placed very high.
* If the end of the water drain hose is sealed in pond.
* If the internal rubber seal ring of drain valve is 
   blocked by dirt.

No Spining

* If the washer placed unlevelly or tiltingly.
* If the clothes pressed to one side of the tub, or too
    many clotlies placed.
* If the lid closed.

Power                               240V~/50Hz            Working Water Pressure    O.O3MPa-1MPa

Input  Power                                280W            Gross  Weight                                        18kg

Norminal  Wash Capacity           2.2  kg           Washing Type                Novel Water  Flow

Norminal  Spin  Capacity             2.2  kg           Draining  Type                         Upper  Drain

Overall  Dimensions    438X438X695mm        Dewaterb  Type                                Spining

TROUBLE SHOOTING

If the supply cord is damaged, it must be replaced by the manufacturer or its 
service agent or a similarly qualified person in order to avoid a hazard.
CAUTION: If this appliance is supplied from a cord extension set or electrical 
portable outlet device, the cord extension set or electrical portable outlet device 
must be positioned so that it is not subject to splashing or ingress of moisture.

Summary of Contents for XQB22-(AUS)22G











Reviews: