140528/2
Page
6
of
32
RECEIVING AND UNPACKING
The shipping material and the ITZ FLEX ULTRASTAB should be thoroughly
inspected for signs of obvious physical damage immediately upon receipt.
All materials in the package should be checked against the enclosed packing list and
the list of standard delivery below. LEM Switzerland S.A. will not be responsible for
any shortages unless notified no later than 14 days after receiving.
The LEM ITZ FLEX ULTRASTAB package should contain:
•
19 inch rack-mount ITZ FLEX ULTRASTAB electronics
•
Transducer head – depending on nominal current range
•
European (Schuko) and US mains cable with three-pin IEC female connector
•
Cable for connecting head and rack electronics
•
Analog output cable
•
Current short-plug and analog out short-plug
•
Final manufacturing test check-list.
IN CASE OF DAMAGE
If the equipment is damaged in any way, a claim should be filed with the shipping
agent, and a full report of the damage should be forwarded to LEM Switzerland S.A.
or our local representative immediately upon receiving.
Upon receipt of this report, LEM Switzerland S.A. will forward instructions concerning
the repair, replacement or return shipment.
Please include the Type No., Serial No., and Order No. for the ITZ FLEX
ULTRASTAB on any communication with LEM Switzerland S.A. or our local
representative.
