background image

Select 

SNBR.

 The number displayed on the right is 

the univocal serial number of the product.

 RESET

>SNBR: 00001

 EXIT

 EXIT

YES      NO

 RESET?

YES      NO
 RESET OK

RESET DSP30-4G

S/N DSP30-4G

EXIT

To restore the default settings select 

RESET

 and 

confirm 

YES

 pressing 

⏎. 

The display will show 

RESET OK

 for a few second to confirm the operation. 

If you wish to skip the 

RESET 

select 

NO 

and press

 

 to confirm.

To end the programming procedure select 

EXIT 

and press 

⏎. 

Select 

YES

 to exit programming 

mode and press 

 to confirm.

To carry on with the programming, select 

NO

  and  

press 

⏎ 

to confirm.

 THR: 55dBuV 

>RESET

MONITOR

 RESET 

>MONIT: OFF

The 

MONITOR

 function activates a real time 

monitoring procedure which check that the input 

level of each selected MUX is greater than the 

entered 

THR

 input threshold. If the measured level 

of a MUX is lower than the T

HR

  threshold,  the 

corresponding filters are automatically deactivated. 

When the input level of the deactivated  MUX return 

above the minimum threshold level 

THR

 the filter 

will be automatically reactivated.

Please use the MONITOR function 

with maximum care.

Please note the RESET restore all the 

settings to default.

Summary of Contents for DSP30-4G

















Reviews: