LELY SPLENDIMO TC, Operator'S Manual

Page: 17 / 26

7 MAINTENANCE
Correct machine servicing is necessary with a view to
reliable and safe working.
7.1
Maintenance after operations
- Clean the machine thoroughly. After jet-cleaning allow for
a few moments rotation of the discs so that the water is
swept away.
- Check the mower knives and discs for tightness and
damage (see § 7.3).
- Check the safety cover for damage.
- Grease the machine with a rust preventive.
- Grease the piston rod with an anti-corrosion agent if a
longer period of inactivity is anticipated. Remove the agent
when putting the machine back into operation. If not,
sealing of the ram may be affected after hardening of the
anti-corrosion agent.
7.2
Lubrication
- PTO shaft to be greased every 8 working hours by the
grease nipples on the cross assemblies, protection tubes
and free wheel clutch (fig. 17).
- Profiled tubes of the PTO shaft to be greased every 8
working hours.
- Grease the PTO shaft above the drive element every 100
working hours in way of the grease nipples on the cross
assemblies. For this purpose, the cover (A, fig. 18) and the
sealing plate (B) have to be dismounted. Remove soil
and/or crop material, if any, from the hat.
- Grease the pivots of the intermediate frame every 40
working hours (fig. 19).
- Grease the bearing blocks of the conditioner rotor every 8
working hours (fig. 20).
- Grease or lubricate all remaining pivot points every 40
working hours.
- Apply a few drops of oil to the cams of the breakback
device every 40 working hours (fig. 21).
39
17
8 h
8 h
18
A
B
100 h
19
40 h