LELY SPLENDIMO 240 MC, Operator'S Manual, Page: 13 / 30

EN-11
4 MACHINE ADJUSTMENTS
Put the machine into the working position as follows:
- Pull up the locking hook of the hydraulic ram for a moment and
lower the cutterbar carefully by means of the ram.
Ensure that the abutment pins on the ram are positioned in the
slotted holes of the locking hook (fig. 6).
- Adjust the tractor hydraulics in such a way that the hinge pin of
the main shaft is located 54 cm above the ground (fig. 6). Take
tractor wheelings into account.
Check if the mower headstock remains level width-wise. If
necessary, adjust the tractor lever arms.
Limit a downward movement with stabilisation chains, for
example, if it is impossible to maintain the adjusted height of the
tractor hydraulics.
This adjustment of the tractor hydraulics is essential if the
mower is to follow the ground contour as effectively as
possible.
4.1
Mowing height
- Adjust the mowing height by adjusting the forward inclination of
the cutter bar with the aid of the top link (fig. 7).
4.2
Intensity of conditioning
The intensity of conditioning can be adjusted by means of the
conditioner's crop inlet plate (fig. 8) and the rotor speed.
- Adjust the crop inlet plate.
Position A ensures the highest intensity of conditioning, whereas
it is lowest when the crop inlet plate is adjusted to position B.
There are five intermediate positions.
If the adjustment possibilities of the conditioner crop inlet plate do
not allow sufficient crop flow-through, the position of the crop inlet
plate and the rotor speed may be adjusted. Please refer to
supplement B for more details.
6
54 cm
!
7
A
B
8