Lelit Espresso
- English
EN
13
C.1
Connect one end of the power cord (c) to the socket in the machine and the
other (plug) into the wall socket.
C.2
Turn on the espresso machine by pressing the main on/off switch (1). The
display (11) will show the Lelit logo, the three switches and the gauge will go
on for a short time.
Note.
ONLY for the first time that the machine is switched on, the machine will
start to fill the boiler automatically. During this operation, water will flow from the coffee
distribution group for about 40 seconds and the Lelit logo will flash on the LCC display.
C.3
On the LCC display (11) you’ll see the water boiler temperature flashing.
This will grow until the set temperature will be reached. During this phase,
the steam boiler will be automatically filled until the correct water level will be
reached.
C.4
Wait until the bar is fully loaded and “Ok” appears on the display. This way
the machine will reach the set temperature.
C.5
After reaching the pre-set temperature, the bar will disappear, and the
machine will be ready for use.
D
Checking that the machine is working properly
Coffee
D.1
Insert the filterholder (e) without coffee firmly onto the coffee distribution
group (13), so as to align the handle with the padlock symbol on it.
Note.
With a new machine, in order to reach this position, it is advisable to moisten
the edge of the filter with water. After a short period of use, this position will be reached
regularly without excessive effort.
D.2
Press the coffee switch (2) to dispense about half a litre of water. The di-
splay (11) will show the coffee icon and the chronometer that detects the coffee
dispensing time.
D.3
When you’ve taken about half a litre of water, press the switch (2) to stop
dispensing.
Note.
This procedure helps filling the hydraulic circuit completely and rinsing
the circuit itself.
Hot water
D.4
Place a jug under the hot water nozzle (5).
D.5
Press the hot water switch (4). The pump starts and the water icon appears
on the display (11).
D.6
As soon as water comes out of the nozzle (5), press the switch (4) again to
stop dispensing.