12 - manual Lekker bikes
manual Lekker bikes - 13
Chapter 3 | Fastening recommendation
Although we assure assembling your Lekker Bicycle is not rocket science, it’s good to
understand your bicycle is held together by a lot of nuts and bolts, that might wiggle
loose as the result of intensive use, cobble stones or riding on and off pavements. Get-
ting the right momentum & tension is therefore vital. Please remember loose bike parts
can decrease your bike’s performance and will effect your cycling experience.
Torque Value
• Brake Lever clamp torque 50 - 70 in/lb (5.6 - 7.9 Nm)
• Seat post clamp 50 - 70 in/lb (5.6 - 7.9 Nm)
• Saddle bolt 175 - 240 in/lb (19.7 - 27.1Nm)
• Brake caliper mount to frame 60 - 80 in/lb (6.7 - 9.0 Nm)
• Brake cable anchor bolts 55 - 75 in/lb (6.2 - 8.4 Nm)
• Shift lever clamp bolts 45 - 65 in/lb (5.0 - 7.3 Nm)
• Handlebar clamp bolt 120 - 144 in/lb (13.5 - 16.2 Nm)
• Stem expander bolt 175 - 200 in/lb (19.7 - 22.5 Nm)
• Crank bolts 220 - 320 in/lb (24.8 - 36.1Nm)
• Pedals 250 - 330 in/lb (28.2 - 37.2 Nm)
• Wheels nuts 260 - 390 in/lb (29.3 - 44.0 Nm)
• Bottom bracket 435 - 600 in/lb (49.1 - 67.7 Nm)
Chapter 4 | Love, Care & Safety
Our mechanics have made a short check list for you to ensure your
new Lekker Bicycle will stay in tip-top condition. Your bicycle is
a collection of moving components, subject to mud, water and a
rough city life. Wear and tear is inevitable, but with the right love
and care your bike will be your best friend for years to come.
Tyres
Tyres can soften in as little as a week. Regular pumping of the
tyres will ensure the tyres last as long as possible and that you will
roll with speed. Tyres that are low can make it easier to puncture
tubes and dent rims if you hit a pothole. Regular pumping is very
important.
Lube like a Champ
Lubrication of the chain is very important and will ensure the most
life out of your gearing system. Be sure not to over lubri-cate as
this will attract grit and dust. Apply a small amount of oil to mov-
ing parts and use a small rag to dry off excess oil. You can tell a
chain needs lube when you hear squeaking and the chain links
look like shiny bare metal.
Let’s clean
It is very important to clean your bicycle after messy conditions
like mud or rain. Rain will get dirt and grit into the brake pads and
other parts of the bicycle. Be sure to clean and dry your bicycle af-
ter these conditions to ensure your parts last long and stay happy.
Regular love & care
Although we have designed and built your Lekker Bike to stand the
test of time, it does need some regular love and care. Be sure to
follow the above steps to keep your bike in tip-top condition. We
advice you to give your bike some regular care every 2-3 months,
and bring it to a professional bike mechanic once every year. It will
greatly improve your comfort, safety and your bikes’ health.
