Step 2
The rear rack will be fitted to the
same bolt where your fender stays
(that hold your rear mudguard in
place) are currently connected to.
Using a
4mm allen key
, remove
these bolts on each side. Keep
the fender stay bracket (circular
clamps that hold the fender stay)
Step 3
We will replace the screw we just
removed with the provided slightly
longer version, since it now needs to
hold both the rear rack and the fender
stay bracket.
We are going to screw this into the
lowest hole of the carrier’s case
connector.
Summary of Contents for Amsterdam+
Page 8: ......
