7
EN
Reconnection
If your iPad was in standby mode After turning off the iPad it may be necessary to
pair the two devices again.
Power saving mode
The keyboard automatically enters power saving mode after 15 minutes of inactivity.
Press any key to reactivate it.
Troubleshooting
Note: The keyboard attempts to restore the connection with the last paired device. To
connect to a different device paired earlier, pair that device again.
Issue
Solution
The Bluetooth connection
is lost.
The range may be exceeded. Move both devices closer together
again. Turn the keyboard off an back on. The connection should
be re-established.
Make sure that no other Bluetooth devices, wireless devices or
other devices which may interfere with the connection are on in
the area. Switch off such devices as necessary.
