Leitner LH280, Manual

Page: 9 / 16

9
3.5 Adjusting the ring volume
When the headset is ringing to indicate an incoming call, you can adjust the ring volume
using the volume control buttons located on the headset
3.6 Muting the headset microphone
To mute the headset microphone when on a call, press the mute button on the headset (in
between the volume buttons). While the headset is in mute mode, a short beep will be heard
on the headset every 8 seconds. Press the mute button again to end
3.7 Headset microphone volume setting
You can adjust your speaking volume by using the two buttons located on the bottom of the
headset base
3.8 Adjusting headset listening volume
Use the volume control buttons on the headset to adjust the listening volume. You will
hear a beep for each volume step up or down
3.9 Out of range and reconnection
You will hear warning beeps in the headset when you walk out of range of the base. If the
headset disconnects due to being out of range, the call will not drop. The headset will
automatically reconnect when you are back in range and the call will be active again
NOTE: If you do not move back inside the base range within 5 minutes, the call will be
disconnected