12
3.14 Controlling the Automatic Answer feature for calls
When you take your LH280 off of the base, your call will
not
be answered by
default. If you’d like to turn this feature on, simply hold the ”+” and “–“ buttons on your
headset together for 3 seconds. You’ll know this feature is activated when the LED light
slowly
flashes.
To turn this feature back off, follow the same steps again. This time the LED light will
quickly
flash, letting you know this feature has been turned back off.
3.15 Permanently register an additional headset
•
With the original headset out of the base, press and hold the Volume Up button
undereath the base for about 5 seconds to enter registration mode. The TEL light on
the base will begin to flash to indicate you’re in registration mode
•
Press and hold the ON/OFF button on the 2nd headset until the light on the headset
begins to flash
•
Wait until the ON/OFF light on the headset stops flashing (about 30 seconds)
•
The 2nd headset is now permanently registered to the new base
•
You can charge this headset on its original base without ending the permanent
registration mode
•
To end the permanent registration, follow the instructions in 3.13
*The first headset to turn on will become the primary headset . Only the primary headset can
answer and end calls
Summary of Contents for LH280
Page 1: ...LH280 Manual TM ...
Page 16: ... Leitner Headsets ...
