Leitch DVR-3901 Neo Installation And Operation Manual Download Page 18 | Manualshive

Page: 18 / 112

Leitch DVR-3901 Neo Installation And Operation Manual Download Page 18

2

DVR-3901 Installation and Operation Manual

Chapter 1: Introduction

See the

FR-3901, FR-3903, and FR-3923 Installation and Operation

Manual

for information about NEO frames. The frame manual includes

information about these items:
•

General information about module unpacking, installation,
removal, navigation, configuration, and setup

•

Card-edge screen savers

•

State recovery parameters

•

Fan modules

•

Resource modules

•

Alarm interconnect modules

•

Power supplies

•

Servicing instructions

Product Description

The NEO DVR-3901 Digital Video Recorder is a multifunction digital
video recorder that can, in many applications, replace a VTR. It is
designed to complement the modular line of video, audio, and signal
processing products available for use in the NEO frame. The
DVR-3901 comes with a front module, a back module, and two fixed
2.5 in. (6.35 cm) IDE hard drives that are mounted on the NEO DVR
front module.
The DVR-3901 comes with a VFD display at the front edge of the card.
This display provides a way for you to locally monitor and control the
operation of this module.

Note

Installation, navigation,
configuration, and setup
information is now included in
the

NEO FR-3901, FR-3903,

and FR-3923 Mounting Frames
Installation and Operation
Manual

. If your current NEO

frame manual is Edition A, B,
C, or D, you will need to
download an updated version
from the Leitch Web site
(

www.leitch.com

) to access this

information.

Note

In Europe and Asia the 2.5 in.
(6.35 cm) hard drive is
described as 9.5 mm.

«
...
16
17
18
19
20
...
»

Summary of Contents for DVR-3901 Neo

















































































































Reviews:

No comments