24
Welding parameters – Programming
• The hand extruder is suitable for the following types of thermoplastic: PP/PE-HD/PE-LD
•
Programs 1 – 3
include the relevant preset values, which can be adjusted during the course of the welding
process.
• The adjustments are not saved!
• The free settings 1 - 4 are factory set and can be freely programmed. The parameters remain saved after
the tool is switched off.
• The
welding program (17)
currently set is shown in the operating display.
Free
setting
1-4
Welding program
Target PLAST [°C]
Target AIR [°C]
Free settings 1 – 4
230
260
Prg1 PE-LD
220
260
Prg2 PE-HD
230
260
Prg3 PP
230
260
Prg4 PVC
170
260
Menu
Select program
Scroll
Enter
• Release the
locking device (4)
of the
motor on/off switch (2)
as applicable, and then let go of the
motor on/
off switch (2
). Remove welding material in the welding shoe in order that the welding shoe is not damaged with
the next start.
• Switch off the heating with the
Standby / Enter key (26).
• Let the tool to cool down for approx. 5 min.
• Switch off at the
main switch (1)
.
Switching off the tool
Summary of Contents for WELDPLAST S4
Page 59: ......
