The LEISTER Welding-Pen R is a hot air tool that can be installed for continuous operation.
It has an ergonomic shape and is light weight what makes it suitable as hand tool as
well as for the installation into machines and vent constructions.
The cooled heater tube as well as the LEISTER screw-on drawing nozzle with
taking tip make the Welding Pen to a very efficient tool for plastic welding.
• Welding of thermoplastic materials and also single-ply flexible plastics in the
form of boards, tubes, profiles, foams, tiles and sheets.
• The following procedures are possible:
Rod and melt welding by means of LEISTER nozzles
• The hot air tool Welding PenR needs an external air-supply
(LEISTER blower or compressed air).
LEISTER Welding-Pen R
Hot air tool
Please read operating instructions carefully
before use and keep for further reference.
GB
OPERATING INSTRUCTIONS
1
APPLICATION
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com [email protected]
• Digital display of SET and ACTUAL
temperature values
• Temperature steplessly controlled
• Heating element protection
• Adaptor tube with heat protection
