The LEISTER Welding-Pen A and S are hot air tools that can be installed for continuous
operation. They have an ergonomic shape and are light weight what makes them
suitable as hand tools as well as for the installation into machines and vent constructions.
The cooled heater tube as well as the LEISTER screw-on drawing nozzle with
taking tip make the Welding Pen to a very efficient tool for plastic welding.
• Welding of thermoplastic materials and also single-ply flexible plastics in the
form of boards, tubes, profiles, foams, tiles and sheets.
• The following procedures are possible:
Rod and melt welding by means of LEISTER nozzles
• The hot air tools Welding Pen A and S need an external air-supply
(LEISTER blower or compressed air).
LEISTER Welding-Pen A
LEISTER Welding-Pen S
Hot air tools
Please read operating instructions carefully
before use and keep for further reference.
GB
OPERATING INSTRUCTIONS
1
APPLICATION
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com [email protected]
LEISTER Welding-Pen A
• Heating element protected
against overheating
• Adaptor tube with heat protection
• Temperature steplessly adjustable
by regulation of air flow
LEISTER Welding-Pen S
• Heating element protected
against overheating
• Adaptor tube with heat protection
• Temperature steplessly adjustable
with potentiometer
