10
Leister UNIROOF E
Hot Air welder
• Overlap welding of roof sheeting made of PVC, TPO, ECB, EPDM and CSPE on areas close to edges.
• Overlap welding of sheets and coated fabric.
• Welding seam width 40 mm (1.6 inch).
Application
Please read operating instructions carefully before use
and keep for future reference.
Danger !
Unplug the tool before opening it, as live components and connections
are exposed.
Incorrect use of hot-air tools can present a
fire and explosion hazard,
particularly
in the proximity of flammable materials and explosive gases.
Gerät
muss beobachtet
betrieben werden.
Wärme kann zu brennbaren Materialien gelangen, die sich ausser Sichtweite
befinden.
Gerät darf nur von
ausgebildeten Fachleuten
oder unter deren
Aufsicht benützt werden. Kindern ist die Benützung gänzlich untersagt.
For personal protection we strongly recommend the tool to be connected to an
RCCB
(Residual Current Circuit Breaker) before using it on construction sites.
The
rated voltage
stated on the tool must correspond with the mains voltage.
EN 61000-3-11; Z
max
= 0.139
+ j 0.087
. If necessary, consultate supply
authority.
Danger of getting burned !
Do not touch the end of the heater tube and nozzle
when they are hot. Let the tool cool down. Do not point the hot-air flow in the
direction of people or animals.
Protect the tool
from damp and wet.
FI
230
120
Warning
Caution
Connect tool to a
receptacle with protective earth terminal.
Any disconnection
of the protective conductor in or outside the tool is dangerous!
Use extension cord with protective conductor only.
Operating Instructions
(Translation of the original operating instructions)
GB
USA