Leister HOTWIND PREMIUM, Operating Instructions Manual

Page: 16 / 136

Operating Instructions
(Translation of the original operating instructions)
16
Hot air blower
HOTWIND PREMIUM, HOTWIND SYSTEM
The HOTWIND PREMIUM hot air blower and HOTWIND SYTEM are designed for continuous operation.
They are ideally suited for installation in machines, systems and devices or even as hand devices and table
top units.
Their most important applications include; drying and heating, thawing, accelerating and removal,
sterilising, smoothing, polishing, activation and dissolving, separating and fusing, shrinking, soldering,
welding, removal, kindling..
Application
GB
Please read operating instructions carefully before use
and keep for future reference.
Danger to life when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the de-
vice.
Incorrect use of the hot air blower can present a fire and explosion hazard
especially near combustable materials and explosive gases.
Danger – can cause burns! Do not touch the heating element tube and nozzle
while they are hot. Allow the device to cool. Do not direct hot-air stream towards
people or animals.
Warning
The device must not be left unattended when in use.
Heat can reach combustible materials which are out of sight. The device may only
be used by
trained personnel or under their supervision. Children may not use
the device under any circumstances.
For personal protection, we strongly recommend the tool be connected to an
RCCB ( R esidual C urrent C ircuit B reaker) before using it on construction sites.
The nominal voltage indicated on the device must correspond to the mains
voltage. EN 61000-3-11; Z
max
= 0.053 + j 0.033 . If necessary, consult your
electricity supply utility.
Keep away from wet and damp areas.
FI
120
230
Caution
Congratulations on purchasing a HOTWIND !
You have chosen a top-class hot air blower by Leister, made from high-quality materials. Every HOTWIND
undergoes stringent quality checks before leaving the factory in Switzerland.