analogue solutions
Leipzig
e&oe (c) 1-1-08
11
MIXER
The mixer is used to bring various audio source signals together
for fi ltering. There are four mixer controls. In all cases, centre is
zero volume, or turn to the left or right to select either of two sound
sources.
NOISE/EXT1 level
Turning the control anti-clockwise in increasing amounts sends
the signal (if any) coming in off the rear panel EXT1 socket to the
mixer.
Turning the control clockwise in increasing amounts sends white
Noise to the mixer.
In a central position no signal is sent to the mixer.
-1/-2 SUB level
SUB is a duplication of the VCO square wave output, but at a
lower octave. Use to beef up the sound.
Turning the control clockwise in increasing amounts sends a -2
octave VCO2 square wave signal to the mixer.
Turning the control anti-clockwise in increasing amounts sends
a -1 octave VCO2 square wave signal to the mixer.
In a central position no signal is sent to the mixer.
Saw/Pulse VCO1 level
Turning the control clockwise in increasing amounts sends VCO1s
pulse signal to the mixer.
Turning the control anti-clockwise in increasing amounts sends
VCO1s sawtooth wave signal to the mixer.
In a central position no signal is sent to the mixer.
Saw/Pulse VCO2 level
Turning the control clockwise in increasing amounts sends VCO2s
pulse wave signal to the mixer.
Turning the control anti-clockwise in increasing amounts sends
VCO2s sawtooth wave signal to the mixer.
In a central position no signal is sent to the mixer.
