3
Leikr watch will vibrate and the satellite icon at the bottom of the display stops blinking and turns steady. The
number of satellites locked will show next to the satellite icon. To boost the performance of the GPS connect the
watch to the Internet by turning on the Leikr watch within the range of a registered network within hours before
starting the training session. Please make sure the satellite icon at the bottom of the display is always visible; if
the icon is not present, please restart your Leikr.
Start, stop, pause and save your training
Press the key “Start” to begin your training session. The same Key then turns into a “Stop” key. Press the “Stop”
key to pause the workout. Once you pause a workout, the same key turns into a “Resume” key. Press the
“Resume” key to continue your workout or press the key “Save” to save the training in the “Training History”
menu.
Transfer your training to Endomondo and Strava
To sync the Leikr watch and transfer your training to Endomondo and Strava, press the two keys located on the
opposite side of the Leikr logo (Upper left Key 1 and lower left Key 4). The syncing procedure can be
successfully launched from the watch when the watch is in the range of a registered Wi-Fi, there is no need to
place the watch in the charging station or to do any manual transfer of files. Release the keys immediately
after you see the syncing screen appearing.
Indoor training
Choose the profile “Running Indoor” and connect to an ANT+ Foot pod to use the Leikr watch to train on a tread
mill or on an indoor running track. The GPS connection is turned off and the running parameters such as Pace,
Distance and Calories are now detected through the Foot pod. To learn how to connect an ANT+ Foot pod
follow the instructions reported below.
The Active screen and Maps screen
The Active screen: main area
When you turn on your Leikr watch, you are presented with the “Active screen”. In the main area of the active
screen you can see two types of information: on the left side you have the duration parameters, Time, Distance
and Calories. They will increase progressively through your training. On the right hand side of the “Active
screen” you can find the target parameters that would fluctuate during your training: Speed, Instant Pace and
Heart Rate.
