Leicke KN40512 User Manual Download Page 7

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. 
These   limits   are   designed   to   provide   reasonable   protection   against   harmful   interference   in   a   residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or
relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or
an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1.     This device may not cause harmful interference, and
2.     (2) this device must accept any interference received, including interference that

         may cause undesired operation.
FCC-Caution: FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
Radiation Exposure Statement: 

1.     This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

End users should follow the specific instructions in the user's manual to comply with the FCC rules.

2.     This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

 

DISPOSAL

This device contains materials that must not be disposed of as household waste. Please check
local laws concerning the applicable disposal regulations. Protect the environment by participating
in recycling programs! 

7

Summary of Contents for KN40512









Reviews: