CONNECTION DIAGRAM
1: Input Composite Video CVBS / BNC
2: Input S-Video
3:
Out
put VGA
4:
In
put VGA
CONNECTION AND OPERATION
Step 1:
Connect your video source, like camera, video recorder, game console etc., with
the converter's input. The VGA input can be used to connect e.g. PCs or notebooks.
Step 2:
Connect the VGA output with the output device. Please make sure, that the
correct input of the display is adjusted. Also the display should support at least a resolution of
800x600
or the resolution you have adjusted.
Step 3:
You may now use the converter. Connect the power supply and switch on the
source device.
Step 4:
If you use sources having another output than PAL (like SECAM or NTSC) you
may adjust the standard in the menu by using the menu key. If the standards do not match,
the image will be distorted or the colours will not be right.
Step 5:
With the converters menu you may also adjust parameters like contrast,
colours, brightness etc. to your wishes. The converter may now
be used.
4
