Leica S APO, User Manual

Page: 49 / 85

S Series User Manual Get Set! 49
HDMI Mode – Capturing Images Without a Computer or Without a Wireless
Device (Continued)
3. Insert the SD memory card into the slot
on the side of the S9 i until the card clicks
into place. The S9 i is now ready to capture
images onto the SD memory card.
Capturing an image
•
It is critical to properly set the
microscope eyepieces’ diopters to
ensure that the images on the SD memory
card are in focus when the image is in focus
through the microscope’s eyepieces. Refer
to the microscope’s user manual for proper
diopter setting. Focus the microscope at
high magnification, then change to the
magnification at which you wish to capture
the image. Do not refocus the microscope.
You can also use the HDMI output and an HD
display (not provided) as a focusing aid.
4. To capture an image onto SD card, press the
capture button, located on the side of the
S9 i camera.
O
You will hear a beep to acknowledge the
button was pressed.
O
The status LED flashes green while the
image is being captured.
O
You will hear another beep when the S9 i
has completed capturing the image and the
status LED will return to steady green.
The image is now saved on the SD card. Images
which are on the SD card can be viewed using
the optional remote control. See "Camera
Remote Control" on page 57.
5. While in HDMI mode, you can connect the
provided HDMI cable from the camera to
an HD monitor or HD projector to share the
image.