Element
Description
☞
Formatting is irreversible. Make sure to back up
the data from USB stick before formatting to
avoid loss of data. When quick Format is per-
formed the content of the USB stick is deleted
and default directories "RTC360Store" and
"Languages" are automatically created.
Tap the checkbox to enable
GPS.
The GPS position of the setup is
stored if available.
Tap the checkbox to store and
use the compass reading with
the setup.
Tap the checkbox to determine
and use relative height differ-
ences.
Tap
Set
to set the atmospheric
pressure at your reference elev-
ation.
Tap
Update
to update the
atmospheric pressure at your
reference elevation.
Tap the checkbox to enable the
LED indicator.
Tap the checkbox to enable
monitoring of tilt change
occurred during data acquisi-
tion.
To detect a tilt change of the
instrument, tilt values measured
before and after data acquisi-
tion are compared.
A notification of a change in tilt
is displayed when the data
acquisition is completed.
☞
By default the setting is enabled after each start-
up of the device. Disable
Monitor Tilt Change
only when using the scanner on moving platforms
such as ships, offshore platforms.
☞
When the setting is disabled, measured tilt values
are not stored.
Tap the checkbox to enable a
scan preview.
The preview will be shown when
the scan is completed.
Tap the checkbox to enable
sound notifications.
Operation
35
