Leica RANGEMASTER CRF 1600-B, Instructions Manual

Page: 31 / 186

29
BaSic infOrmaTiOn On
menu cOnTrOl
For all settings:
- The main menu contains four items - Meters/Yards
display ( USEU ), Ballistic curve ( baLL ), Zeroing range
( SId ) and Ballistic output format ( AbC ). Details of the
individual functions can be found in the relevant
sections.
- Both the main menu and the setting options are set
up as a continuous loop - i.e. all items/settings will be
displayed over and over as you continue pressing the
button.
SeTTing The uniT Of meaSure
The Leica Rangemaster CRF 1600-B can be set to a
metric (
EU ) or imperial ( US ) unit system, i.e. for distance/
temperature/atmospheric pressure either meters/
Celsius/millibar or yards/Fahrenheit/InHg (Inches of
Mercury). This setting also determines the unit for the
holdover, the ballistic curves and the zeroing range (see
p. 37/36/35).
Setting
1. Press and hold the secondary button (1) (
≥
3s).
• The display shows USEU (flashing)
2. Press the main button (2) to select the desired unit of
measure.
US
= for display in yards
EU
= for display in meters
note:
The current setting can always be seen in the display - if
metric values are selected, a dot appears to the bottom
right of the reticule.
3. Save your setting by briefly pressing the secondary
button.
• The saved setting is initially lit continuously as
confirmation, then the display switches to the next
item in the menu (ballistic curve „
bALL
“) and then
disappears if no further settings have been made.