21
SETTING THE UNIT OF MEASURE
The LEICA RANGEMASTER CRF 1000 can be set to
meters or yards, the more commonly used unit in the
USA.
Setting:
1. Briefly press (<3s) the main button (2).
• The target mark appears.
2. Press and hold (≥3s) the secondary button (1).
•
EU
.
US
appears below the target mark.
3. Briefly press the main button.
•
EU
disappears, the target mark and
US
continue
to flash.
4. Select your preferred units of measure by (repeat-
edly) pressing the secondary button.
US
stands for
the unit yards,
EU
for meters.
• The respective displays continue to flash.
5. Save your setting by briefly pressing the main button.
• The saved setting and the target mark light up
continuously for 2 seconds for confirmation and
then disappear.
Notes:
• The current setting can always be seen in the
display - if meters are selected, a dot appears
to the bottom right of the target mark.
• Concerning the setting process: The displays
disappear 3 seconds after you last press one of
the two buttons. The previously saved setting is
retained.
2_Rangemaster_CRF 1600_gb.indd 21
01.10.10 12:14
Summary of Contents for Rangemaster CRF 1000
Page 2: ...3 4 2 1 3a 9 8 5 6 4 7...
Page 104: ...101 Leica LEICA RANGEMASTER CRF 1000 7 8_Rangemaster_CRF 1600_ru indd 101 01 10 10 12 03...
Page 106: ...103 8_Rangemaster_CRF 1600_ru indd 103 01 10 10 12 03...
Page 114: ...111 a a b b 106 106 a b 109 104 111 8_Rangemaster_CRF 1600_ru indd 111 01 10 10 12 03...
