18
ATTACHING THE CARRYING CORD
Feed the small loop on the carrying cord through
the eyelet (4) on the housing of the LEICA RANGE-
MASTER CRF 1000. Then thread the end of the cord
through the small loop and pull tight, so that the
resulting loop is securely around the eyelet on the
housing.
INSERTING AND CHANGING THE BATTERY
The LEICA RANGEMASTER CRF 1000 is powered by
a 3 Volt lithium cell (e.g. Duracell DL CR2, Ucar CR2,
Varta CR2, or other CR2 types).
1. Open the cover (6) on the battery compartment
(7) by turning it anticlockwise.
2. Insert the battery so that the positive contact
goes in first (as shown by the markings in the bat-
tery compartment).
3. Close the cover again by turning it clockwise.
Close
Open
2_Rangemaster_CRF 1600_gb.indd 18
01.10.10 12:14
Summary of Contents for Rangemaster CRF 1000
Page 2: ...3 4 2 1 3a 9 8 5 6 4 7...
Page 104: ...101 Leica LEICA RANGEMASTER CRF 1000 7 8_Rangemaster_CRF 1600_ru indd 101 01 10 10 12 03...
Page 106: ...103 8_Rangemaster_CRF 1600_ru indd 103 01 10 10 12 03...
Page 114: ...111 a a b b 106 106 a b 109 104 111 8_Rangemaster_CRF 1600_ru indd 111 01 10 10 12 03...
