Leica RANGEMASTER CRF 1000-R, Instructions Manual

Page: 30 / 130

28
Settings
When the device is turned on: Wait until the display
disappears. When the device is not turned on:
Start with step 1.
1. Press and hold the secondary button (1) (≥3s).
• The display shows
USEU
.
2. Press the secondary button briefly (<2s) one times.
• The display changes.
3. Press the main button (2) several times to select the
required setting (
EHr ON
/
OFF
) .
4. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation and then disappears.
VieWing and checking SeTTingS
If you want to check your settings, you can display the
values at any time.
To do this, briefly press the secondary button (2) twice.
• Below the reticle (or instead of the range), the following
will appear in turn for around 2s each:
- the set unit system (
EU
or
US
)
-
EHr
(if the function is enabled)