60
Accessories
6.5.2
Installing the Battery
•
To install the battery, loosen
the two locking screws (a)
below the rear handle and pull
out the Handle and Battery
Assembly (b).
•
The battery sits in a holder that
is part of the handle assembly.
Turn the Handle and Battery
Assembly upside-down.
•
Press the battery into the
holder until the small tab (c)
locks the battery in place.
•
Turn the Handle and Battery
Assembly over and slide the it
into the rear of the Piper. The
gold contacts (d) should be
facing up as shown.
•
Tighten the two locking screws
(a) firmly to ensure a good
watertight seal.
d
c
b
a