Leica M125 C, User Manual

Page: 39 / 107

Leica M Series User Manual Assembly 39
Leica LED5000 RL: Assembly
Required tools
O
None
The Leica LED5000 RL is installed on the
objective using a single screw. It has
been optimized for a working distance between
50 mm and 80 mm.
Constraints
The Leica LED5000 RL can be used only in
conjunction with the planapochromat 1× and
planapochromat 0.63× objectives. With all
other objectives, the working distance is too
low for adequate illumination.
The ring illuminator cannot be used together
with the objective nosepiece.
Assembly
1. Connect the Leica CAN bus cable provided
to the ring illuminator.
2. Place the Leica LED5000 RL against the
objective from below, push it up as far as it
will go and screw it into place.
3. Plug the other end of the cable into an
available CTL2 socket on the column.
Continued on next page.