Leica GR10, Operational Manual

Page: 234 / 317

9: How to
233
How to backup and restore receiver settings
Background information
If several receivers are to be used with the same configuration, with differences in the coordinates and IP settings
only, it would be convenient to not have to type in these settings into every receiver.
For any use case that requires the same receiver configuration to be installed more than once, the backup and
restore functionality saves a lot of time and effort.
Before you begin
Installing the same receiver functionality on more than one receiver via the restore function also sets the same
communication settings on all receivers. If the receivers are then all connected to the same network, the same IP and
hostname may connect to any of the available receivers. Make sure that the communication settings are clearly
dedicated for each receiver.
Access management is overwritten with the access settings stored in the backup file when
installing a new set of receiver settings. Make sure that the access settings stored in the backup
file are known, in order to prevent being locked out of the web interface.
Step-by-step backup receiver settings
Step Description
1
Open the receiver’s web interface in a browser window by typing in the receivers IP or host name.
2
Go to
Receiver setup / Tools
and open the
Receiver settings backup
tab.
3
Press
Backup current receiver settings
. The receiver now collects all receiver
configuration information and stores it in a zipped backup file.
4
The backup file is now listed on the Receiver settings backup page. Press Download to
download the file to your PC. It can then be used to install the same settings on another receiver
or archived for later use.
The file name contains the date and time of the file being created and the receiver’s serial
number. This simplifies keeping track archived of receiver backup files.
Step-by-step restore/install receiver settings