Leica GR10, Operational Manual

Page: 116 / 317

6: Context sensitive help
Outgoing data stream wizard: Configure NTRIP server (source)
Background Information
This mode allows the receiver to act as Ntrip Server, and to provide data to an Ntrip Caster.
In terms of TCP/IP, the Ntrip server mode is in fact a TCP client mode. As an Ntrip Server, the receiver connects to a
caster and starts to stream data.
Setting Descriptions
The table below describes the settings that can be configured on the Configure NTRIP server (source) page.
Setting Description
Server IP address
The IP address of the Ntrip server to connect to.
Enter the numeric IP address. The IP range is from 1.0.0.0 to
223.255.255.254 including.
TCP/IP port
Enter the TCP/IP port to connect to on the NTRIP server.
Mount point
Enter the mount point.
The mountpoint is the identifier of a data stream on an Ntrip
Caster. It is needed to provide data to an Ntrip Caster.
Password
Enter a password.
A password for authentication is required in order to send data to
the Ntrip Caster.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Outgoing data stream .
115