Leica GPS1200+, Technical Reference Manual

Page: 512 / 1442

Config...\Interfaces... - General 512
22.3.7 Configuration of GGA Message Sending for Reference Network Appli-
cations
Description Most reference networks require an approximate position of the rover. For reference network
applications, a rover dials into the reference network and submits its approximate position in
form of a NMEA GGA message.
By default, the receiver sends GGA messages with updated current positions automatically
when a reference network is selected.
Surveying regulations in some countries require that one certain position can be selected.
This position is then sent to the reference network as GGA message through the real-time
interface every five seconds.
Refer to "F.3 GGA - Global Positioning System Fix Data" for information on GGA message
format.
Access step-by-step
OR
Press a hot key configured to access the screen CONFIGURE Send GGA NMEA . Refer
to "6.1 Hot Keys" for information on hot keys.
OR
Press USER . Refer to "6.2 USER Key" for information on the USER key.
Step Description
1. Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode .
2. ROVER (F2) to access CONFIGURE Additional Rover Options .
3. GGA (F5) to access CONFIGURE Send GGA NMEA .