Leica GPS1200+, Technical Reference Manual

Page: 477 / 1442

Config...\Interfaces... - General 477
22.3 Real-Time
22.3.1 Overview
Description The real-time interface allows real-time related parameters to be configured. This includes
defining if the receiver should work as a reference or a rover and the real-time messages to
be used. Up to two real-time interfaces can be configured on the receiver.
Access Select Main Menu: Config...\Interfaces... . Highlight Real-Time . EDIT (F3) .
OR
Press a hot key configured to access the screen CONFIGURE Real-Time Mode . Refer
to "6.1 Hot Keys" for information on hot keys.
OR
Press USER . Refer to "6.2 USER Key" for information on the USER key.
OR
Within the configuration set wizard. Refer to "14.2 Accessing Configuration Set Manage-
ment".
Depending on the access, some options are not editable.
Next step
IF the real-time
interface is THEN
not to be used Refer to "22.3.2 Configuration without Real-Time Interface".
for a reference Refer to "22.3.3 Configuration of a Reference Real-Time Interface".
for a rover Refer to "22.3.4 Configuration of a Rover Real-Time Interface".