Leica GPS1200+, Technical Reference Manual, Page: 1217 / 1442

Survey - General 1217
45.6.4 Initialise while Static
Initialise while static
step-by-step
Step Description Refer to
chapter
1. Refer to "45.6.2 Accessing Initialisation for Real-Time Rover Opera-
tions" to access the initialisation.
2. Does the receiver currently have a fixed solution?
• If
yes , continue with step 4.
• If no , continue with the next row.
)
The initialisation starts automatically.
3. Continue with step 7.
4. YES (F6) to start the initialisation. The current ambiguity solution is
discarded.
)
SURVEY Survey: Job Name
)
The position status icon changes to the code solution icon.
)
STOP (F1) is available but must not be pressed until the ambiguity
solution is gained.
)
The initialisation is gained when the ambiguities are solved. This is
indicated by the position status icon.
5. Any configurations for <Auto STOP:> in CONFIGURE Point Occu-
pation Settings are ignored. STOP (F1) when enough data is
collected.
19.6