Leica Emspira 3, User Manual

Page: 35 / 73

Emspira 3 User Manual Installation 35
Stand-Alone Mode: Installing Optional External Devices
The optional external devices
(handswitch, footswitch, USB thumb
drive, wireless USB mouse) can be
configured in the OSD menu.
For information on configuring
the external devices, refer to the
On-Screen-Display User Manual.
Installing the hand s witch / footswitch
ON/OFF SS HDMI
SPEED
1
1. Plug the handswitch / footswitch in the
designated connection port on the rear
side of the Emspira 3 (2.5 mm phone jack).
Installing the USB thumb drive
Make sure to read the following instruc-
tions about formatting and handling the
USB thumb drive provided in order to prevent
malfunctions during image acquisition.
File system and formatting:
The exFAT or FAT32 file system is required for the
thumb drive to work correctly, as it is detected
by EMSPIRA 3. Most USB thumb drives are
factory-formatted with FAT32 so that they can
be used immediately.
If the USB thumb drive is formatted differently,
Emspira 3 provides the ability to reformat it
as exFAT. You have to press "USB Eject" button
but do not remove the stick and then go to the
settings page to format. During this process all
data on the stick are erased.
ON/OFF SS HDMI
SPEED
1
1. To ensure fast data storage, insert the USB
thumb drive with sufficient free memory
in the USB SPEED port on the rear side of
Emspira 3.