28
5. Assembly
• Remove the plug cap on the left side of the
stand.
• Insert the polarizer into the receptacle until it
latches in place (Fig. 30).
Motorized analyzer
• Insert the analyzer cube as described in sec-
tion 5.7 "Equipping the Incident Light filter
turret"
→
p. 26, in the corresponding position
on the filter turret. See the list provided
(“identification Sheet”) for the correct
position.
6.9 DIC Prisms
Fig. 30
Inserting the analyzer
1
The plug cap is replaced with the analyzer.
• Insert the objective prism into the tube slot
(Fig. 31.1). The code letter must match the
code letter on the objective.
• With the microscope Leica DM5000 B the DIC
objective prisms are already mounted in the
DIC turret above the objective revolving
nosepiece(Fig. 68).
5.10 Optional Accessories
Fig. 31
Inserting the objective prism slide
1
Objective prism slide
1
1
