Leica 2700-B, Instructions Manual

Page: 55 / 252

EN
53
IMPACT POINT CORRECTION USING ELE-
VATION ADJUSTMENT
(Click/MoA adjustment)
Variations in the point of impact can be compensated
by adjusting the reticle on your riflescope accordingly.
Based on the bullet trajectory and the zeroin distance,
the Leica Rangemaster can show you the required
adjustment, i.e. the relevant number of clicks. For
different elevations, you can specify whether the click
levels will be
– based on the international standard MOA (min-
utes of angle) graduation, or
– displayed in 5 or 10 millimeter increments.
Displaying and checking the set ballistic
parameters
If you want to check your settings, you can display the
values at any time.
Press the secondary button
1
briefly 2x.
• Below the reticule (instead of the range, if this was
previously displayed), the following will appear in
turn for around 2 s each:
– the set ballistic curve
– the set zeroing distance
– the set ballistic output value
Note:
When all ballistic functions are deactivated (
bALL
=
OFF
), only the
OFF
setting is displayed.