Leica 262, Instructions Manual

Page: 64 / 113

EN
60
W
ar
nings/Leg
al no
tices
The CE identification of our products documents compliance
with the fundamental requirements of the applicable EU
directives.
WARNING MESSAGES
• Modern electronic elements react sensitively to electrostatic
discharge. As you can easily pick up charges of tens of thou-
sands of volts, by walking on synthetic carpets for example, a
discharge can occur when you touch your camera, particularly if
it is placed on a conductive surface. If only the camera housing
is touched, this discharge is harmless to the electronics. How-
ever, despite built-in safety circuits, the outer contacts, such as
the accessory shoe, battery or rear panel contacts, should not
be touched if at all possible for safety reasons. If the accessory
shoe is not in use, the relevant cover (supplied) should always be
in place.
• For any cleaning of the contacts, do not use an optical micro-
fiber cloth (synthetic); use a cotton or linen cloth instead! Before
touching the contacts, you can make sure you discharge any
electrostatic charge by deliberately touching a heating or water
pipe (conductive, earthed material). You can also avoid soiling
and oxidization of the contacts by storing your camera in a dry
place with the lens or bayonet cover fitted.
• Use only the recommended accessories to prevent faults, short
circuits or electric shock.
• Do not attempt to remove parts of the housing (covers); repairs
must be done at authorized service centers only.
LEGAL INFORMATION
• Please ensure that you strictly observe copyright laws. The
recording and publication of pre-recorded media such as tapes,
CDs, or other published or broadcast material may contravene
copyright laws.
• This also applies to all of the software supplied.
• The SD, HDMI, and USB logos are registered trademarks.
• Other names, company and product names referred to in this
manual are trademarks or registered trademarks of the respec-
tive companies.