Leica 20 050 Instruction Manual Download Page 92

Page: 92 / 138

Review mode

REVIEW MODE

There are two completely independent Review functions available:

– short-term rendering directly after exposure (Preview)

– normal Review mode, in which the stored recordings can be

viewed and managed for any length of time

Notes

• Recorded pictures are not automatically rotated in Review mode

to utilize the full screen area.

• It may not be possible to render files with this camera that were

not recorded with this device.

• In some cases, the screen image may not have the expected

quality, or the LCD panel will remain blank and only display the

file name.

• You can toggle back from playback mode to recording mode at

any time by tapping the shutter button.

CONTROL ELEMENTS IN REVIEW MODE

22:45

22.02.2012

999-9000

8234/9999

2.8

1/8000

12500

ISO

INFO

button

Thumbwheel

PLAY

button

Directional pad

button

Center button

Summary of Contents for 20 050











































































































































Search results

Summary of Contents for 20 050

Reviews:

Related manuals for 20 050

Brands by name

Popular brands

Leica 20 050, Instruction Manual

Search results

Summary of Contents for 20 050

Reviews:

Related manuals for 20 050

Brands by name

Popular brands