background image

EN

Preparation

39

Notes

• Many lenses have their item number engraved on the opposite 

side of the depth of field scale.

• The list also includes lenses that used to be available without 

encoding (pre-June 2006). Newer lenses are all provided with 

encoding and can therefore be automatically detected.

• When using the Leica Tri-Elmar-M 16-18-21 f/4 ASPH., the set 

focal length is not transferred to the camera housing will 

therefore also not be included in the EXIF picture dataset. You 

can, however, enter the focal length manually.

• Tri-Elmar-M 28-35-50 f/4 ASPH., on the other hand, comes 

equipped with the means for mechanical transmission of the set 

focal length to the camera need for mirroring the correct 

bright-line frame in the viewfinder. The focal length is scanned 

by the camera electronics and the information is used for focal 

length-specific corrections. Due to space limitations, the menu 

only contains an item number (11 625). The two other variants 

– 11 890 and 11 894 – can be used as well and the menu 

settings will apply.

USING A LEICA R LENS

The lens type must also be entered manually when attaching a 

Leica R lens via the Leica R adapter. The camera will automatically 

switch to 

Manual R

Manual R

 when a Leica R lens is attached, no matter what 

setting existed originally. You will have to select the lens type from 

the list.

 

Select 

Lens Detection

Lens Detection

 in the main menu

 

 Select 

Manual R

Manual R

 

Select the attached lens from the list

Summary of Contents for 20 050











































































































































Reviews: