Leica 10854 Instruction Manual Download Page 151

Page: 151 / 220

Video Mode

151

Notes

• The enlargement function remains active until it is exited.

• This function is unavailable while recording.

AF ASSIST LIGHT

The AF assist light is not active in video mode.

ACOUSTIC AF CONFIRMATION

You can set an acoustic confirmation signal for successful focus

metering in AF mode (see p. 76).

Note

• This function is unavailable while recording.

MANUAL FOCUSING (MF)

Manual focusing offers more control and is less prone to incorrect

settings than the AF modes.

▸

Select

Focusing

in the main menu

▸

Selecting

Focus Mode

▸

Select

▸

Start video recording

▸

Turn the focus setting ring to select the desired focusing.

MF SETTINGS*

Factory setting:

The speed of the MF setting is adjustable. Example: for a setting to

90°

, the entire focus range will be run through when the focus

setting ring is turned by one quarter. A full turn of the focus setting

ring will be needed for a setting to

360°

. Smaller angles allow faster

adjustments, while larger angles offer more precise settings.

▸

Select

Focusing

in the main menu

▸

Select

MF Setup

▸

Select the desired setting
(

Standard MF

90°

120°

150°

180°

210°

240°

270°

300°

330°

360°

Maximum

)

* This function will become available with the 2020 firmware update. Registered

users will be automatically notified about updates, see p. 12 and p. 191.

Subject to changes.

Summary of Contents for 10854





























































































































































































































Search results

Summary of Contents for 10854

Reviews:

Related manuals for 10854

Brands by name

Popular brands

Leica 10854, Instruction Manual

Search results

Summary of Contents for 10854

Reviews:

Related manuals for 10854

Brands by name

Popular brands