13
Technical Data
Leica DISTO™ plus 1.0.0 GB
de
GB
fr
it
es
nl
ja
Wet, smooth or high-gloss surfaces
1 Aiming at a "obtuse" angle deflects the laser beam. The
Leica DISTO™ plus may receive a signal that is too
weak (error message 255).
2 If aiming at a right angle, the Leica DISTO™ plus may
receive a signal that is too strong (error message 256).
Inclined, round surfaces
Can be measured with the laser.
Requirement: There is enough area on the target surface
for the laser spot.
Using a target plate
Use target plates 563875 (DIN C6) or 723385 (DIN A4’), if
the signal is too weak (e 255), if the targeted surface is too
rough, if the surface has poor reflection or during dayligh
when measuring from more than 30 meters away.
•
White surfaces: to up approx. 30 m
•
Brown surfaces: from approx. 30m to 200 m
In the field
Leica DISTO™ plus is equipped with an integrated
telescopic viewfinder (2x magnification).
With measurements from a distance of 25 m the laser spot
is in the centre of the crosshairs. Below a distance of 25 m
the laser spot moves to the edge of the crosshairs.
D5 Z_telescop
Technical Data
Measuring accuracy
(2x standard deviation)
typ.: ± 1.5mm / max.: ± 3mm*
Smallest unit displayed
1mm**
Range (from about 30m, use
target plate)
0.2m up to 200 m
Time for a measurement dist / trc
0.5...ca.4s / 0.16...ca.1s
∅
Laser spot (at distance)
6 / 30 / 60 mm (10 / 50 / 100 m)
Integrated telescopic viewfinder
Illumination
Multiline display
Multifunctional endpiece
Time delay release
Pocket calculator
BLUETOOTH
®
Tracking
Constant
10 values
min./ max. Tracking.
Pythagoras
Mermory (Stack)
15 values
Battery, Type AA, 2x 1.5V
up to 10’000 measurements ***
(only with Alkaline batteries!)
Splash and dustproof
IP54 acc. IEC529: splash and
dustproof
Dimension and weight
172 x 73 x 45 mm, 335g
Measuring accuracy of bubble
1°
Temperature range
Storage
Operating
-25°C to +70°C
(-13°F to +158°F)
-10°C to +50°C
(-14°F to +122°F)
Summary of Contents for DISTO plus
Page 1: ...7 25 1 6 5 67 1 0 7 5 ...