Leica Geosystems DD120 Series User Manual Download Page 2

Page: 2 / 68

Introduction

Congratulations on the purchase of a Leica Detection product.

This manual contains important safety directions as well as instructions for set-

ting up the product and operating it. Refer to "1 Safety Directions" for further

information.
Read carefully through the User Manual before you switch on the product.

The model and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or

Leica Geosystems authorised service centre.

This manual applies to the Leica Detection DD120, DD130 Series Locators, DA

Series Transmitters and Detection Accessories. Differences between the mod-

els are marked and described.

Name

Description/Format

Leica DD120,

DD130 Ser-

ies Locators

& Accesso-

ries Quick

Guide

Provides an overview of the product together with

technical data and safety directions. Intended as a

quick reference field guide.

Leica DD120,

DD130 Ser-

ies Locators

& Accesso-

ries User

Manual

All instructions required in order to operate the

product to a basic level are contained in the User

Manual. Provides an overview of the product

together with technical data and safety directions.

Refer to the following resources for all Leica DD120, DD130

documentation/software:

•

the Leica USB documentation card

•

https://myworld.leica-geosystems.com

myWorld@Leica Geosystems (

https://myworld.leica-geosystems.com

) offers

a wide range of services, information and training material.
With direct access to myWorld, you are able to access all relevant services

whenever it is convenient for you.

Service

Description

myProducts

Add all products that you and your company own

and explore your world of Leica Geosystems: View

detailed information on your products and update

your products with the latest software and keep up-

to-date with the latest documentation.

Purchase

Product identification

Validity of this

manual

Available

documentation

Summary of Contents for DD120 Series





































































Search results

Summary of Contents for DD120 Series

Reviews:

Brands by name

Popular brands

Leica Geosystems DD120 Series, User Manual

Search results

Summary of Contents for DD120 Series

Reviews:

Brands by name

Popular brands