manualshive.com logo in svg

Leica Geosystems BLK3D, User Manual

Share
Download
Leica Geosystems BLK3D User Manual Download Page 67

CAUTION

Changes or modifications not expressly approved by Leica Geosystems for

compliance could void the user's authority to operate the equipment.

The radiated output power of the instrument is far below the FCC radio fre-

quency exposure limits. Nevertheless, the instrument should be used in such a

manner that the potential for human contact during normal operation is min-

imised. To avoid the possibility of exceeding the FCC radio frequency exposure

limits, keep a distance of at least 20 cm between you (or any other person in

the vicinity) and theantenna that is built into the instrument.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:
1

.

This device may not cause harmful interference, and

2

.

This device must accept any interference received, including interference

that may cause undesired operation.

 

 

 

FCC Radiation Expos-

ure Statement

☞

Labelling

Safety Directions

67

Summary of Contents for BLK3D







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands